MC33 Manufacture and Scan
Page 1

LILAC Document Help

MC33 Manufacture and Scan

MC33 Scanning Process

Page2: 1.0 Assembly Weld > Raw Stock > Warehouse
Page3: 2.0 Raw Stock > Finished > Order Control > Wrapping > Despatch

MC33 Manufacture and Scan
Page 2

1.0 Assembly Weld > Raw Stock > Warehouse

LILAC
1.1 Production Order. Process: Raw Stock
> Work Order

1.2 Work Order.
> *Labels: Tag with Hole -> Print


MC33
- Response "Type Company Id / Scan User" -> Done (Scan LILAC User Barcode.....01???)
- Response "Root Menu"

1.3 Root Menu -> New Weld Job
- Response "Scan Employee Badge"-> Done (Scan Employee Badge)
- Response (If no job) "No Job for EMP???" Go to: Documents > ECB > Welding Jobs: Refresh. This will release a job.
- Response. EMP??? assigned an available Work Order. "Welder EMP??? on job WO??? Product Code x Quantity"
Complete (END OF CYCLE)

- At this stage EMP??? is not asked to scan the Raw Stock Barcode he is working on. EMP??? only does this when he finishes...possibility exists where he could working on the wrong bar....only to find an incompatable scan at the next step Welding Complete.

- Next step Welding Complete

1.4 Root Menu -> Welding Complete
- Response "Scan Employee Badge"-> Done (Scan Employee Badge)
- Response "EMP??? Active Location ZZZ??? Scan Labels"-> Done (Scan Raw Stock Label: From Raw Stock Work Order)
- Response "WO??? ? to location 3z 999 Order Control: Work Order Complete"
Complete (END OF CYCLE)

- Next step (optional) apply a finish. New Finish Batch. (See 2.0 Finish and Despatch Product from Raw Stock Warehouse)

Through steps 1.1 - 1.4 the Job WO??? would have appeared at Documents > ECB > Welding Jobs....and then been removed from the list following process 1.4

*This Raw Stock product is at a warehouse location ZZZ???. For finishing (ie polished), a Sales Order is raised, > Work Ordered, and Top label and Tag with hole Label printed. Finished internally or externally, return from the finisher, order control, wrapped, and despatched.

MC33 Manufacture and Scan
Page 3

2.0 Raw Stock > Finished > Order Control > Wrapping > Despatch

LILAC
2.1 Sales Order. Process: STK POL (Polished)
> Work Order

2.2 Work Order.
> *Labels: Top Label + Tag with Hole -> Print

MC33
2.2 Root Menu -> New Finisher Batch
- Response "New Finisher Batch ###??? Scan Destination" - > Done (Scan Finishing Location)
- Response "Location FC 01? Scan Finished Bar" - > Done (Scan Barcode from Sales Work Order stipulating Polished finish)
- Response "Finished Bar ***??? Scan Raw Bar" - > Done (Scan attached Raw Barcode from Production Order)
- Response "Raw WO??? Placed in FC 01? Scan Finished Bar"
Complete (END OF CYCLE)

- Next Step: Finished Return


2.4 Root Menu -> Finished Return
- Response "Scan Return Location" - > Done (Scan a location barcode for this product to be returned to).
- Response "Location ????? Scan Ref/Employee" - > Done (Scan employee badge)
- Response "Employee EMP??? Scan Returned Bar" - > Done (Scan finished bar)
- Response "WO??? to ????? Scan Returned Bar"
Complete (END OF CYCLE)

- Next Step: Order Control


2.5 Root Menu -> Order Control
- Response "Scan Completed Bar" - > Done (Scan finished bar)
- Response "W/O ***??? Scan Package Label" - > Done (Scan Package / Top Label)
- Response "Finished Product Code, Raw Product Code, ICZ???, Polish, Bal Adj, BoM Done Complete Scan Completed Bar "
Complete (END OF CYCLE)

- Next Step: Wrapping Scan


2.6 Root Menu -> Wrapping Scan
- Response "Scan Bar to Wrap" - > Done (Scan finished bar)
- Response "Wrapped By >>>" - > Done (Scan Employee)
- Response "Checked By >>>" - > Done (Scan Employee)
- Response "Enter Pin" - > Done (1234)
- Response "WO??? Wrapped Scan Bar to Wrap" - >
Complete (END OF CYCLE)

- Next Step: Despatch


2.7 Despatch
- Response "Scan Sales Work Order" - > Done (Scan finished bar)
- Response "Sales W/O WO??? Single Item Enter ConNote" - > Done (Scan Con Note)
- Response "Con??? Confirm Invoice" - > Done (Enter)
- Response "Invoice Number: !!!??? Print it" - > Done (Enter)
- Response "" - >
Complete (END OF CYCLE)